在建筑材料領域，彩鋼復合板憑借出色性能，成為各類建筑的理想之選。禹城作為該板材重要產地，產品憑借可靠質量和豐富類型，備受市場關注。下面，一起深入了解其材質構成。

In the field of building materials, color steel composite panels have become an ideal choice for various types of buildings due to their excellent performance. Yucheng, as an important production area for this board, has attracted market attention for its reliable quality and diverse types of products. Next, let's delve into its material composition together.

一、基板：堅實的根基

1、 Substrate: A solid foundation

禹城彩鋼復合板基板多采用熱鍍鋅或鍍鋁鋅鋼板。熱鍍鋅鋼板以 Q235 或 Q345 鋼材為基材，鍍鋅量每不低于 80 克，能隔絕氧氣與水分，延緩銹蝕。鍍鋁鋅鋼板表面鍍覆 55% 鋁、43.4% 鋅與 1.6% 硅組成的合金鍍層，不僅耐腐蝕性佳，耐熱性也更突出。

Yucheng color steel composite board substrates often use high-quality hot-dip galvanized or aluminum zinc coated steel plates. Hot dip galvanized steel sheet is made of Q235 or Q345 steel as the substrate, with a galvanizing amount of not less than 80 grams per square meter, which can isolate oxygen and moisture and delay corrosion. The surface of aluminum zinc coated steel plate is coated with an alloy coating composed of 55% aluminum, 43.4% zinc, and 1.6% silicon, which not only has good corrosion resistance but also outstanding heat resistance.

二、涂層：賦予外觀與防護

2、 Coating: endowing appearance and protection

在基板上，禹城彩鋼復合板涂有聚酯（PE）、硅改性聚酯（SMP）、氟碳（PVDF）等功能性涂層。聚酯涂層色彩豐富、加工性好，戶外壽命 5 - 8 年，成本低，多用于一般工業建筑。硅改性聚酯涂層加入硅氧烷，提升了硬度與耐候性，戶外壽命 8 - 15 年，適用于商業建筑。氟碳涂層以聚偏氟乙烯樹脂為主，耐候、耐腐蝕且自潔性強，15 年以上不褪色，適用于高端建筑。

On the substrate, Yucheng color steel composite board is coated with functional coatings such as polyester (PE), silicon modified polyester (SMP), fluorocarbon (PVDF), etc. Polyester coating has rich colors, good processability, outdoor lifespan of 5-8 years, low cost, and is mostly used in general industrial buildings. Silicon modified polyester coating with added siloxane enhances hardness and weather resistance, with an outdoor lifespan of 8-15 years, suitable for commercial buildings. Fluorocarbon coating is mainly made of polyvinylidene fluoride resin, which is weather resistant, corrosion-resistant, and has strong self-cleaning properties. It will not fade for more than 15 years and is suitable for high-end buildings.

三、芯材：決定性能的關鍵

3、 Core material: the key to determining performance

1. 聚苯乙烯（EPS）芯材

1. Polystyrene (EPS) core material

EPS 芯材由可發性聚苯乙烯珠粒成型，質輕、保溫佳，導熱系數 0.033W/(m?K)，成本低，多用于臨時建筑。但防火性能差，屬 B2 級可燃材料。

EPS core material is formed from expandable polystyrene beads, which is lightweight, has good insulation, a thermal conductivity of 0.033W/(m? K), low cost, and is commonly used in temporary buildings. But it has poor fire resistance and belongs to B2 level combustible materials.

2. 擠塑聚苯乙烯（XPS）芯材

2. Extruded polystyrene (XPS) core material

XPS 芯材通過擠出工藝制成，密度更高，導熱系數低 0.028W/(m?K)，抗壓性強，適用于對保溫和結構強度要求高的建筑，如冷庫。不過較高，防火性能欠佳。

XPS core material is made through extrusion technology, with higher density and a thermal conductivity as low as 0.028W/(m? K). It has strong compressive strength and is suitable for buildings with high requirements for insulation and structural strength, such as cold storage. However, the price is high and the fire resistance is poor.

3. 聚氨酯（PU）芯材

3. Polyurethane (PU) core material

PU 芯材由異氰酸酯和多元醇發泡而成，導熱系數 0.024W/(m?K)，閉孔率超 95%，防水性好。經特殊處理可達 B1 級難燃標準，廣泛應用于對保溫、防水和防火要求高的建筑。

PU core material is foamed with isocyanates and polyols, with a thermal conductivity of 0.024W/(m? K), a closed cell rate of over 95%, and good waterproof performance. After special treatment, it can reach the B1 level flame retardant standard and is widely used in buildings with high requirements for insulation, waterproofing, and fire prevention.

4. 巖棉和玻璃棉芯材

4. Rock wool and glass wool core materials

巖棉和玻璃棉屬無機纖維材料，不燃，防火等級 A1 級。巖棉以玄武巖等為原料，玻璃棉以玻璃為原料。二者導熱系數分別為 0.040W/(m?K) 和 0.038W/(m?K)，保溫和吸音降噪效果好，常用于防火要求嚴格的建筑。

Rock wool and glass wool are inorganic fiber materials, non combustible, and have a fire rating of A1. Rock wool is made from basalt and other materials, while glass wool is made from glass. The thermal conductivity coefficients of the two are 0.040W/(m? K) and 0.038W/(m? K), respectively. They have good insulation, sound absorption and noise reduction effects, and are commonly used in buildings with strict fire protection requirements.

禹城彩鋼復合板材質豐富，為不同建筑需求提供了多樣解決方案。選擇時，需綜合考慮建筑功能、環境和預算，以發揮其優勢。

Yucheng's color steel composite panels are made of a variety of materials, providing diverse solutions for different building needs. When making a choice, it is necessary to comprehensively consider the building's functionality, environment, and budget to maximize its advantages.

本文由禹城彩鋼復合板友情奉獻.更多有關的知識請點擊:http://m.ouruite-weld.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is a friendly contribution from Yucheng Color Steel Composite Panel For more information, please click: http://m.ouruite-weld.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message